If you’re stuck on the FRP lock screen on your Motorola G35 after a factory reset, you’re not alone. FRP (Factory Reset Protection) is a security feature added by Google to protect your phone in case it’s lost or stolen. But the problem is, if you reset your phone and can’t remember the Google account that was previously added, your own device becomes unusable.
In this guide, I’ll show you a simple and safe method to remove the FRP lock on your Motorola G35 and get back into your phone — no complicated tricks, just a step-by-step solution that actually works in 2025.
🔐 What is FRP Lock & Why Does It Activate?
FRP (Factory Reset Protection) automatically kicks in after a factory reset if a Google account was previously added to the phone. It asks for the original account login during setup to verify ownership.
This feature:
- Prevents unauthorized access to your phone
- Protects your data if your phone is lost or stolen
However, FRP can also lock out rightful owners who’ve forgotten their account credentials. That’s where this guide comes in.
🛠️ How to Bypass FRP on Motorola G35 – Step-by-Step Instructions
Step 1: Download the Required Tool
To unlock your Motorola G35, you’ll need the SPD Research Tool (also known as SPD Flash Tool). This software is used for flashing firmware and removing FRP from Spreadtrum-based devices like the G35.
🔗 [Download SPD Research Tool]
🔗 [Download Firmware]
✅ Step 2: Extract the Files
Once downloaded:
- Right-click the ZIP file
- Choose “Extract All”
- Save it in a folder where you can easily find it
✅ Step 3: Open the Tool on Your PC
- Go to the extracted folder
- Launch the ResearchDownload.exe file
- The tool interface will open, ready for action
✅ Step 4: Connect Your Motorola G35 to the Computer
- Power off your phone
- Hold the required key combo (usually Volume Down or Volume Up)
- Connect the phone to your PC using a USB cable
- Your PC should detect the device — if not, install USB drivers
✅ Step 5: Load the Firmware File
Inside the tool:
- Click the “Load Packet” icon
- Browse and select the correct firmware file for your Motorola G35
- Ensure it’s specifically designed for your model to avoid errors
✅ Step 6: Start the FRP Unlock Process
- Click Start/Run in the SPD tool
- The software will begin communicating with your phone
- In a few minutes, it will wipe the FRP lock from your device
✅ Step 7: Reboot and Setup Your Phone
Once the tool finishes:
- Disconnect your phone
- Power it on
- You can now skip the Google verification and set up a new account
⚠️ Important Precautions Before You Begin
- Double-check that you’ve downloaded the correct firmware for your specific model
- Ensure your battery is at least 50% charged
- Don’t disconnect the phone during the flashing process
- If you’re unsure, seek help from a professional technician
✅ Final Thoughts
Bypassing FRP on the Motorola G35 may sound technical, but with the right tools and a careful approach, it’s a manageable process. This guide empowers you to unlock your device quickly and safely.
If you’re ever unsure or face issues, it’s always best to reach out to a reputable technician or FRP unlock service to avoid risking permanent damage to your device. Feel free to share this guide with others who might be stuck on the FRP screen. Your Motorola G35 is just a few steps away from being fully functional again!
